Centos7中安装和配置FreeIPA开发者社区

Centos7中安装和配置FreeIPA

[root@local ~]# cat/etc/sysconfig/network-scripts/ifcfg-eth0
BOOTPROTO=static
IPADDR=192.168.192.130
NETMASK=255.255.255.0
GATEWAY=192.168.192.2
DEVICE=eth0
ONBOOT=yes

hostnamectl set-hostname wang-1.tmp.gce.cloudera.com

yum update -y

firewall-cmd --permanent --add-port={80/tcp,443/tcp,389/tcp,636/tcp,88/tcp,464/tcp,53/tcp,88/udp,464/udp,53/udp,123/udp}

firewall-cmd --reload

firewall-cmd --zone=public --list-ports

172.31.115.124 wang-1.tmp.gce.cloudera.com wang-1
这个/etc/hosts文件的内容类似：
[root@wang-1 ~]# cat /etc/hosts
127.0.0.1  localhost localhost.localdomain localhost4 localhost4.localdomain4
::1        localhost localhost.localdomain localhost6 localhost6.localdomain6
172.31.115.124 wang-1.tmp.gce.cloudera.comwang-1  # Added by Google
169.254.169.254 metadata.google.internal  # Added by Google
[root@wang-1 ~]#

yum -y install rng-tools

systemctl start rngd

systemctl enable rngd

systemctl status rngd

yum -y install bind bind-utils bindbind-dyndb-ldap

vi /etc/named.conf  -- 将以下两个参数改为 yes
dnssec-enable yes;
dnssec-validation yes;

systemctl start named.service
systemctl enable named

systemctl status named

chmod: changing permissions of `/etc/resolv.conf':Operation not permitted

sudo lsattr /etc/resolv.conf

sudo chattr -i /etc/resolv.conf
sudo lsattr /etc/resolv.conf

ipa-replica-prepare hadoop197.example.com--ip-address 192.168.116.197

yum -y install ipa-server ipa-server-dns

ipa-server-install --allow-zone-overlap

Do you want to configure integrated DNS(BIND)?[no]: no

Server host name [ipa.example.org]: ipa.example.org
Please confirm the domain name [example.org]: ipa.example.org
Please provide a realm name [EXAMPLE.ORG]: IPA.EXAMPLE.ORG

[root@wang-1 ~]# ipa-server-install--allow-zone-overlap
The log file for this installation can be found in/var/log/ipaserver-install.log
==============================================================================
This program will set up the IPA Server.
This includes:
  *Configure a stand-alone CA (dogtag) for certificate management
  *Configure the Network Time Daemon (ntpd)
  * Createand configure an instance of Directory Server
  * Createand configure a Kerberos Key Distribution Center (KDC)
  *Configure Apache (httpd)
  *Configure the KDC to enable PKINIT
To accept the default shown in brackets, press theEnter key.
WARNING: conflicting time&date synchronizationservice 'chronyd' will be disabled
in favor of ntpd
Do you want to configureintegrated DNS (BIND)? [no]: yes
Enter the fully qualified domain name of thecomputer
on which you're setting up server software. Usingthe form
<hostname>.<domainname>
Example: master.example.com.
Server host name[wang-1.tmp.gce.cloudera.com]:
Warning: skipping DNS resolution of hostwang-1.tmp.gce.cloudera.com
The domain name has been determined based on thehost name.
Please confirm the domainname [tmp.gce.cloudera.com]:
The kerberos protocol requires a Realm name to bedefined.
This is typically the domain name converted touppercase.
Please provide a realm name[TMP.GCE.CLOUDERA.COM]:
Certain directory server operations require anadministrative user.
This user is referred to as the Directory Managerand has full access
to the Directory for system management tasks andwill be added to the
instance of directory server created for IPA.
The password must be at least 8 characters long.
Directory Manager password:
Password (confirm):
The IPA server requires an administrative user,named 'admin'.
This user is a regular system account used for IPAserver administration.
IPA admin password:
Password (confirm):
Checking DNS domain tmp.gce.cloudera.com., pleasewait ...
Do you want to configure DNSforwarders? [yes]:
Following DNS servers are configured in/etc/resolv.conf: 127.0.0.1, 8.8.8.8
Do you want to configurethese servers as DNS forwarders? [yes]:
All DNS servers from /etc/resolv.conf were added.You can enter additional addresses now:
Enter an IP address for a DNSforwarder, or press Enter to skip:
Checking DNS forwarders, please wait ...
Do you want to search formissing reverse zones? [yes]:
Do you want to create reversezone for IP 172.31.115.124 [yes]:
Please specify the reversezone name [115.31.172.in-addr.arpa.]:
Using reverse zone(s) 115.31.172.in-addr.arpa.
The IPA Master Server will be configured with:
Hostname:      wang-1.tmp.gce.cloudera.com
IP address(es): 172.31.115.124
Domain name:   tmp.gce.cloudera.com
Realm name:    TMP.GCE.CLOUDERA.COM
BIND DNS server will be configured to serve IPAdomain with:
Forwarders:      127.0.0.1, 8.8.8.8
Forward policy:  only
Reverse zone(s): 115.31.172.in-addr.arpa.
Continue to configure thesystem with these values? [no]: yes
The following operations may take some minutes tocomplete.
Please wait until the prompt is returned.
Configuring NTP daemon (ntpd)
  [1/4]:stopping ntpd
  [2/4]:writing configuration
  [3/4]:configuring ntpd to start on boot
  [4/4]:starting ntpd
Done configuring NTP daemon (ntpd).
Configuring directory server (dirsrv). Estimatedtime: 30 seconds
  [1/44]:creating directory server instance
  [2/44]:enabling ldapi
  [3/44]:configure autobind for root
  [4/44]:stopping directory server
  [5/44]:updating configuration in dse.ldif
  [6/44]:starting directory server
  [7/44]:adding default schema
  [8/44]:enabling memberof plugin
  [9/44]:enabling winsync plugin
  [10/44]:configuring replication version plugin
  [11/44]:enabling IPA enrollment plugin
  [12/44]:configuring uniqueness plugin
  [13/44]:configuring uuid plugin
  [14/44]:configuring modrdn plugin
  [15/44]:configuring DNS plugin
  [16/44]:enabling entryUSN plugin
  [17/44]:configuring lockout plugin
  [18/44]:configuring topology plugin
  [19/44]:creating indices
  [20/44]:enabling referential integrity plugin
  [21/44]:configuring certmap.conf
  [22/44]:configure new location for managed entries
  [23/44]:configure dirsrv ccache
  [24/44]:enabling SASL mapping fallback
  [25/44]:restarting directory server
  [26/44]:adding sasl mappings to the directory
  [27/44]:adding default layout
  [28/44]:adding delegation layout
  [29/44]:creating container for managed entries
  [30/44]:configuring user private groups
  [31/44]:configuring netgroups from hostgroups
  [32/44]:creating default Sudo bind user
  [33/44]:creating default Auto Member layout
  [34/44]:adding range check plugin
  [35/44]:creating default HBAC rule allow_all
  [36/44]:adding entries for topology management
  [37/44]:initializing group membership
  [38/44]:adding master entry
  [39/44]:initializing domain level
  [40/44]:configuring Posix uid/gid generation
  [41/44]:adding replication acis
  [42/44]:activating sidgen plugin
  [43/44]:activating extdom plugin
  [44/44]:configuring directory to start on boot
Done configuring directory server (dirsrv).
Configuring Kerberos KDC (krb5kdc)
  [1/10]:adding kerberos container to the directory
  [2/10]:configuring KDC
  [3/10]:initialize kerberos container
  [4/10]:adding default ACIs
  [5/10]:creating a keytab for the directory
  [6/10]:creating a keytab for the machine
  [7/10]:adding the password extension to the directory
  [8/10]:creating anonymous principal
  [9/10]:starting the KDC
  [10/10]:configuring KDC to start on boot
Done configuring Kerberos KDC (krb5kdc).
Configuring kadmin
  [1/2]:starting kadmin
  [2/2]:configuring kadmin to start on boot
Done configuring kadmin.
Configuring ipa-custodia
  [1/5]:Making sure custodia container exists
  [2/5]:Generating ipa-custodia config file
  [3/5]:Generating ipa-custodia keys
  [4/5]:starting ipa-custodia
  [5/5]:configuring ipa-custodia to start on boot
Done configuring ipa-custodia.
Configuring certificate server (pki-tomcatd).Estimated time: 3 minutes
  [1/28]:configuring certificate server instance
  [2/28]:exporting Dogtag certificate store pin
  [3/28]:stopping certificate server instance to update CS.cfg
  [4/28]:backing up CS.cfg
  [5/28]:disabling nonces
  [6/28]:set up CRL publishing
  [7/28]:enable PKIX certificate path discovery and validation
  [8/28]:starting certificate server instance
  [9/28]:configure certmonger for renewals
  [10/28]:requesting RA certificate from CA
  [11/28]:setting audit signing renewal to 2 years
  [12/28]:restarting certificate server
  [13/28]: publishing the CA certificate
  [14/28]:adding RA agent as a trusted user
  [15/28]:authorizing RA to modify profiles
  [16/28]:authorizing RA to manage lightweight CAs
  [17/28]:Ensure lightweight CAs container exists
  [18/28]:configure certificate renewals
  [19/28]:configure Server-Cert certificate renewal
  [20/28]:Configure HTTP to proxy connections
  [21/28]:restarting certificate server
  [22/28]:updating IPA configuration
  [23/28]:enabling CA instance
  [24/28]:migrating certificate profiles to LDAP
  [25/28]:importing IPA certificate profiles
  [26/28]:adding default CA ACL
  [27/28]:adding 'ipa' CA entry
  [28/28]:configuring certmonger renewal for lightweight CAs
Done configuring certificate server (pki-tomcatd).
Configuring directory server (dirsrv)
  [1/3]:configuring TLS for DS instance
  [2/3]:adding CA certificate entry
  [3/3]:restarting directory server
Done configuring directory server (dirsrv).
Configuring ipa-otpd
  [1/2]:starting ipa-otpd
  [2/2]:configuring ipa-otpd to start on boot
Done configuring ipa-otpd.
Configuring the web interface (httpd)
  [1/22]:stopping httpd
  [2/22]:setting mod_nss port to 443
  [3/22]:setting mod_nss cipher suite
  [4/22]:setting mod_nss protocol list to TLSv1.0 - TLSv1.2
  [5/22]:setting mod_nss password file
  [6/22]:enabling mod_nss renegotiate
  [7/22]:disabling mod_nss OCSP
  [8/22]:adding URL rewriting rules
  [9/22]:configuring httpd
  [10/22]:setting up httpd keytab
  [11/22]:configuring Gssproxy
  [12/22]:setting up ssl
  [13/22]:configure certmonger for renewals
  [14/22]:importing CA certificates from LDAP
  [15/22]:publish CA cert
  [16/22]:clean up any existing httpd ccaches
  [17/22]:configuring SELinux for httpd
  [18/22]:create KDC proxy config
  [19/22]:enable KDC proxy
  [20/22]:starting httpd
  [21/22]:configuring httpd to start on boot
  [22/22]:enabling oddjobd
Done configuring the web interface (httpd).
Configuring Kerberos KDC (krb5kdc)
  [1/1]:installing X509 Certificate for PKINIT
Done configuring Kerberos KDC (krb5kdc).
Applying LDAP updates
Upgrading IPA:. Estimated time: 1 minute 30 seconds
  [1/10]:stopping directory server
  [2/10]:saving configuration
  [3/10]:disabling listeners
  [4/10]:enabling DS global lock
  [5/10]:disabling Schema Compat
  [6/10]:starting directory server
  [7/10]:upgrading server
  [8/10]:stopping directory server
  [9/10]:restoring configuration
  [10/10]:starting directory server
Done.
Restarting the KDC
Configuring DNS (named)
  [1/12]:generating rndc key file
  [2/12]:adding DNS container
  [3/12]:setting up our zone
  [4/12]:setting up reverse zone
  [5/12]:setting up our own record
  [6/12]:setting up records for other masters
  [7/12]:adding NS record to the zones
  [8/12]:setting up kerberos principal
  [9/12]:setting up named.conf
  [10/12]:setting up server configuration
  [11/12]:configuring named to start on boot
  [12/12]:changing resolv.conf to point to ourselves
Done configuring DNS (named).
Restarting the web server to pick up resolv.confchanges
Configuring DNS key synchronization service(ipa-dnskeysyncd)
  [1/7]:checking status
  [2/7]:setting up bind-dyndb-ldap working directory
  [3/7]:setting up kerberos principal
  [4/7]:setting up SoftHSM
  [5/7]:adding DNSSEC containers
  [6/7]:creating replica keys
  [7/7]:configuring ipa-dnskeysyncd to start on boot
Done configuring DNS key synchronization service(ipa-dnskeysyncd).
Restarting ipa-dnskeysyncd
Restarting named
Updating DNS system records
Configuring client side components
Using existing certificate '/etc/ipa/ca.crt'.
Client hostname: wang-1.tmp.gce.cloudera.com
Realm: TMP.GCE.CLOUDERA.COM
DNS Domain: tmp.gce.cloudera.com
IPA Server: wang-1.tmp.gce.cloudera.com
BaseDN: dc=tmp,dc=gce,dc=cloudera,dc=com
Skipping synchronizing time with NTP server.
New SSSD config will be created
Configured sudoers in /etc/nsswitch.conf
Configured /etc/sssd/sssd.conf
tryinghttps://wang-1.tmp.gce.cloudera.com/ipa/json
[try 1]: Forwarding 'schema' to json server'https://wang-1.tmp.gce.cloudera.com/ipa/json'
trying https://wang-1.tmp.gce.cloudera.com/ipa/session/json
[try 1]: Forwarding 'ping' to json server'https://wang-1.tmp.gce.cloudera.com/ipa/session/json'
[try 1]: Forwarding 'ca_is_enabled' to json server'https://wang-1.tmp.gce.cloudera.com/ipa/session/json'
Systemwide CA database updated.
Adding SSH public key from/etc/ssh/ssh_host_rsa_key.pub
Adding SSH public key from/etc/ssh/ssh_host_ecdsa_key.pub
Adding SSH public key from/etc/ssh/ssh_host_ed25519_key.pub
[try 1]: Forwarding 'host_mod' to json server'https://wang-1.tmp.gce.cloudera.com/ipa/session/json'
SSSD enabled
Configured /etc/openldap/ldap.conf
Configured /etc/ssh/ssh_config
Configured /etc/ssh/sshd_config
Configuring tmp.gce.cloudera.com as NIS domain.
Client configuration complete.
The ipa-client-install command was successful
==============================================================================
Setup complete
Next steps:
        1.You must make sure these network ports are open:
               TCP Ports:
                 * 80, 443: HTTP/HTTPS
                 * 389, 636: LDAP/LDAPS
                 * 88, 464: kerberos
                 * 53: bind
               UDP Ports:
                 * 88, 464: kerberos
                 * 53: bind
                 * 123: ntp
        2.You can now obtain a kerberos ticket using the command: 'kinit admin'
          This ticket will allow you to use the IPA tools (e.g., ipa user-add)
          and the web user interface.
Be sure to back up the CA certificates stored in/root/cacert.p12
These files are required to create replicas. Thepassword for these
files is the Directory Manager password
[root@wang-1 ~]#

kinit admin

ipa user-find admin

[root@wang-1 ~]# ipa user-find admin
--------------
1 user matched
--------------
  Userlogin: admin
  Last name:Administrator
  Homedirectory: /home/admin
  Loginshell: /bin/bash
  Principalalias: admin@TMP.GCE.CLOUDERA.COM
  UID:580800000
  GID:580800000
  Accountdisabled: False
----------------------------
Number of entries returned 1
----------------------------
[root@wang-1 ~]#

# ipa user-add jmutai  --first=Josphat--last=Mutai --email=jmutai@computingforgeeks.com  --shell=/bin/bash--password

[root@wang-2 ~]# ipactl status                                                                                                           
Directory Service: RUNNING
krb5kdc Service: RUNNING
kadmin Service: RUNNING
httpd Service: RUNNING
ipa-custodia Service: RUNNING
ntpd Service: RUNNING
pki-tomcatd Service: RUNNING
ipa-otpd Service: RUNNING
ipa: INFO: The ipactl command was successful
[root@wang-2 ~]#

[root@xuefeng-1 ~]# ipactl --help
Usage: ipactl start|stop|restart|status
Options:
  -h,--help            show this help messageand exit
  -d,--debug           Display debugginginformation
  -f,--force           Force IPA to start.Combine options --skip-version-
                        check and--ignore-service-failures
 --ignore-service-failures
                        If any service startfails, do not rollback the
                       services, continue with theoperation
 --skip-version-check  skip versioncheck

yum -y install ipa-client ntp

rpm -qa|grep -I ipa
[root@cdswdemo-2 ~]# rpm-qa|grep -i ipa
ipa-client-4.6.4-10.el7.centos.6.x86_64
python-ipaddress-1.0.16-2.el7.noarch
python2-ipalib-4.6.4-10.el7.centos.6.noarch
ipa-common-4.6.4-10.el7.centos.6.noarch
libipa_hbac-1.16.2-13.el7_6.8.x86_64
ipa-client-common-4.6.4-10.el7.centos.6.noarch
python-libipa_hbac-1.16.2-13.el7_6.8.x86_64
python2-ipaclient-4.6.4-10.el7.centos.6.noarch
sssd-ipa-1.16.2-13.el7_6.8.x86_64
python-iniparse-0.4-9.el7.noarch
[root@cdswdemo-2 ~]#

[root@ipa112 ~]# ipa-client-install--domain=example.com --realm=EXAMPLE.COM --principal=admin@EXAMPLE.COM--password=hadoop123 --enable-dns-updates --permit --no-ntp
Provide your IPA server name (ex:ipa.example.com): ipa110.example.com  --输入ipaserver,需要注意后面一定不要带空格，否则就会抛出异常

ipa-client-install

[root@wang-2 ~]#ipa-client-install
WARNING: ntpd time&date synchronizationservice will not be configured as
conflicting service (chronyd) is enabled
Use --force-ntpd option to disable it and forceconfiguration of ntpd
DNS discovery failed to determine your DNS domain
Provide the domain name ofyour IPA server (ex: example.com): gce.cloudera.com
Provide your IPA server name(ex: ipa.example.com): wang-1.gce.cloudera.com
The failure to use DNS to find your IPA serverindicates that your resolv.conf file is not properly configured.
Autodiscovery of servers for failover cannot workwith this configuration.
If you proceed with the installation, serviceswill be configured to always access the discovered server for all operationsand will not fail over to other servers in case of failure.
Proceed with fixed values andno DNS discovery? [no]: yes
Client hostname: wang-2.gce.cloudera.com
Realm: GCE.CLOUDERA.COM
DNS Domain: gce.cloudera.com
IPA Server: wang-1.gce.cloudera.com
BaseDN: dc=gce,dc=cloudera,dc=com
Continue to configure thesystem with these values? [no]: yes
Skipping synchronizing time with NTP server.
User authorized to enroll computers: admin
Password for admin@GCE.CLOUDERA.COM:
Successfully retrieved CA cert
   Subject:     CN=CertificateAuthority,O=GCE.CLOUDERA.COM
   Issuer:      CN=CertificateAuthority,O=GCE.CLOUDERA.COM
    ValidFrom:  2019-08-11 13:44:00
    ValidUntil: 2039-08-11 13:44:00
Enrolled in IPA realm GCE.CLOUDERA.COM
Created /etc/ipa/default.conf
New SSSD config will be created
Configured sudoers in /etc/nsswitch.conf
Configured /etc/sssd/sssd.conf
Configured /etc/krb5.conf for IPA realmGCE.CLOUDERA.COM
trying https://wang-1.gce.cloudera.com/ipa/json
[try 1]: Forwarding 'schema' to json server'https://wang-1.gce.cloudera.com/ipa/json'
trying https://wang-1.gce.cloudera.com/ipa/session/json
[try 1]: Forwarding 'ping' to json server'https://wang-1.gce.cloudera.com/ipa/session/json'
[try 1]: Forwarding 'ca_is_enabled' to json server'https://wang-1.gce.cloudera.com/ipa/session/json'
Systemwide CA database updated.
Adding SSH public key from/etc/ssh/ssh_host_rsa_key.pub
Adding SSH public key from/etc/ssh/ssh_host_ecdsa_key.pub
Adding SSH public key from/etc/ssh/ssh_host_ed25519_key.pub
[try 1]: Forwarding 'host_mod' to json server'https://wang-1.gce.cloudera.com/ipa/session/json'
Could not update DNS SSHFP records.
SSSD enabled
Configured /etc/openldap/ldap.conf
Configured /etc/ssh/ssh_config
Configured /etc/ssh/sshd_config
Configuring gce.cloudera.com as NIS domain.
Client configuration complete.
The ipa-client-install command was successful
[root@wang-2 ~]#

kinit admin 
ipa-replica-prepare wang-3.gce.cloudera.com
 Replicacreation using 'ipa-replica-prepare' to generate replica file
is supported only in 0-level IPA domain.
The current IPA domain level is 1 and thus thereplica must
be created by promoting an existing IPA client.
To set up a replica use the following procedure:
    1.) set up a client on the hostusing 'ipa-client-install'
    2.) promote the client to replicarunning 'ipa-replica-install'
        *without* replica filespecified
'ipa-replica-prepare' is allowed only in domainlevel 0
The ipa-replica-prepare command failed.

ipa host-add --force --ip-address=172.31.115.236wang-3.gce.cloudera.com
[root@wang-2 ~]# ipa host-add --force--ip-address=172.31.115.236 wang-3.gce.cloudera.com                                                
------------------------------------
Added host "wang-3.gce.cloudera.com"
------------------------------------
  Host name:wang-3.gce.cloudera.com
  Principalname: host/wang-3.gce.cloudera.com@GCE.CLOUDERA.COM
  Principalalias: host/wang-3.gce.cloudera.com@GCE.CLOUDERA.COM
  Password:False
  Keytab:False
  Managedby: wang-3.gce.cloudera.com

ipa host-find
[root@wang-2 ~]# ipa host-find                                                                                                           
---------------
2 hosts matched
---------------
  Host name:wang-2.gce.cloudera.com
  Principalname: host/wang-2.gce.cloudera.com@GCE.CLOUDERA.COM
  Principalalias: host/wang-2.gce.cloudera.com@GCE.CLOUDERA.COM
  SSH publickey fingerprint: SHA256:rwMkR/W/nz4EIzH3b+BLFLjb0tr7UA4vDR4wmBp4l9o root@wang-2(ssh-rsa),
                             SHA256:ppQgDl79Xw/IBqhzutNgqsLgvxAOfSGVOl1OhtV00cY root@wang-2(ecdsa-sha2-nistp256),
                             SHA256:IwracriO47xdmQLkvUODn47swUpp0f4tQ2OcmodVqQg root@wang-2(ssh-ed25519)
  Host name:wang-3.gce.cloudera.com
  Principalname: host/wang-3.gce.cloudera.com@GCE.CLOUDERA.COM
  Principalalias: host/wang-3.gce.cloudera.com@GCE.CLOUDERA.COM
----------------------------
Number of entries returned 2
----------------------------

yum -y install ipa-server

[root@wang-3 sbin]#ipa-replica-install
WARNING: conflicting time&date synchronizationservice 'chronyd' will
be disabled in favor of ntpd
Password foradmin@GCE.CLOUDERA.COM:
Run connection check to master
Connection check OK
Configuring NTP daemon (ntpd)
  [1/4]:stopping ntpd
  [2/4]:writing configuration
  [3/4]:configuring ntpd to start on boot
  [4/4]:starting ntpd
Done configuring NTP daemon (ntpd).
Configuring directory server (dirsrv). Estimatedtime: 30 seconds
  [1/41]:creating directory server instance
  [2/41]:enabling ldapi
  [3/41]:configure autobind for root
  [4/41]:stopping directory server
  [5/41]:updating configuration in dse.ldif
  [6/41]:starting directory server
  [7/41]:adding default schema
  [8/41]:enabling memberof plugin
  [9/41]:enabling winsync plugin
  [10/41]:configuring replication version plugin
  [11/41]:enabling IPA enrollment plugin
  [12/41]:configuring uniqueness plugin
  [13/41]:configuring uuid plugin
  [14/41]:configuring modrdn plugin
  [15/41]:configuring DNS plugin
  [16/41]:enabling entryUSN plugin
  [17/41]:configuring lockout plugin
  [18/41]:configuring topology plugin
  [19/41]:creating indices
  [20/41]:enabling referential integrity plugin
  [21/41]:configuring certmap.conf
  [22/41]:configure new location for managed entries
  [23/41]:configure dirsrv ccache
  [24/41]:enabling SASL mapping fallback
  [25/41]:restarting directory server
  [26/41]:creating DS keytab
  [27/41]:ignore time skew for initial replication
  [28/41]:setting up initial replication
Starting replication, please wait until this hascompleted.
Update in progress, 3 seconds elapsed
Update succeeded
  [29/41]:prevent time skew after initial replication
  [30/41]:adding sasl mappings to the directory
  [31/41]:updating schema
  [32/41]:setting Auto Member configuration
  [33/41]:enabling S4U2Proxy delegation
  [34/41]:initializing group membership
  [35/41]:adding master entry
  [36/41]:initializing domain level
  [37/41]:configuring Posix uid/gid generation
  [38/41]:adding replication acis
  [39/41]:activating sidgen plugin
  [40/41]:activating extdom plugin
  [41/41]:configuring directory to start on boot
Done configuring directory server (dirsrv).
Configuring Kerberos KDC (krb5kdc)
  [1/5]:configuring KDC
  [2/5]:adding the password extension to the directory
  [3/5]: creatinganonymous principal
  [4/5]:starting the KDC
  [5/5]:configuring KDC to start on boot
Done configuring Kerberos KDC (krb5kdc).
Configuring kadmin
  [1/2]:starting kadmin
  [2/2]:configuring kadmin to start on boot
Done configuring kadmin.
Configuring directory server (dirsrv)
  [1/3]:configuring TLS for DS instance
  [2/3]:importing CA certificates from LDAP
  [3/3]:restarting directory server
Done configuring directory server (dirsrv).
Configuring the web interface (httpd)
  [1/22]:stopping httpd
  [2/22]:setting mod_nss port to 443
  [3/22]:setting mod_nss cipher suite
  [4/22]:setting mod_nss protocol list to TLSv1.0 - TLSv1.2
  [5/22]:setting mod_nss password file
  [6/22]:enabling mod_nss renegotiate
  [7/22]:disabling mod_nss OCSP
  [8/22]:adding URL rewriting rules
  [9/22]:configuring httpd
  [10/22]:setting up httpd keytab
  [11/22]:configuring Gssproxy
  [12/22]:setting up ssl
  [13/22]:configure certmonger for renewals
  [14/22]:importing CA certificates from LDAP
  [15/22]:publish CA cert
  [16/22]:clean up any existing httpd ccaches
  [17/22]:configuring SELinux for httpd
  [18/22]:create KDC proxy config
  [19/22]:enable KDC proxy
  [20/22]:starting httpd
  [21/22]:configuring httpd to start on boot
  [22/22]:enabling oddjobd
Done configuring the web interface (httpd).
Configuring ipa-otpd
  [1/2]:starting ipa-otpd
  [2/2]:configuring ipa-otpd to start on boot
Done configuring ipa-otpd.
Configuring ipa-custodia
  [1/4]:Generating ipa-custodia config file
  [2/4]:Generating ipa-custodia keys
  [3/4]:starting ipa-custodia
  [4/4]:configuring ipa-custodia to start on boot
Done configuring ipa-custodia.
Configuring certificate server (pki-tomcatd)
  [1/2]:configure certmonger for renewals
  [2/2]:Importing RA key
Done configuring certificate server (pki-tomcatd).
Configuring Kerberos KDC (krb5kdc)
  [1/1]:installing X509 Certificate for PKINIT
Done configuring Kerberos KDC (krb5kdc).
Applying LDAP updates
Upgrading IPA:. Estimated time: 1 minute 30seconds
  [1/10]:stopping directory server
  [2/10]:saving configuration
  [3/10]:disabling listeners
  [4/10]:enabling DS global lock
  [5/10]:disabling Schema Compat
  [6/10]:starting directory server
  [7/10]:upgrading server
  [8/10]:stopping directory server
  [9/10]:restoring configuration
  [10/10]:starting directory server
Done.
Finalize replication settings
Restarting the KDC
WARNING: The CA service is only installed on oneserver (wang-2.gce.cloudera.com).
It is strongly recommended to install it onanother server.
Run ipa-ca-install(1) on another master toaccomplish this.

[root@wang-3 sbin]# ipa-replica-managelist
Directory Manager password:
wang-2.gce.cloudera.com: master
wang-3.gce.cloudera.com: master
[root@wang-3 sbin]#

[realms] 
 douyu.com = { 
    kdc =ipa.douyu.com:88  #主服务器
    kdc =ipa2.douyu.com:88 #新增热备配置
   master_kdc = ipa.douyu.com:88 
   master_kdc = ipa2.douyu.com:88  #新增
   admin_server = ipa.douyu.com:749 
   admin_server = ipa2.douyu.com:749 #新增
   default_domain = douyu.com 
   pkinit_anchors = FILE:/etc/ipa/ca.crt 
}

ipa-server-install -U --uninstall #服务端卸
ipa-client-install -U --uninstall #客户端卸载
#删除残留文件，避免二次安装失败
cd /var/lib/ipa/
rm -f ca*
rm -f *.txt
rm -f sysrestore/*
cd /var/lib/dirsrv/
rm -rf scripts*
cd /var/run/dirsrv/
rm -rf slapd*
cd /etc/ipa
rm -f ca.crt
cd /var/log/dirsrv
rm -rf slapd*
rm -rf /var/lib/pki* /var/log/pki* /etc/init.d/pki*
rm -rf /usr/share/pki /usr/share/tomcat5/var/lib/tomcat5/
#卸载软件包
yum erase -y `rpmquery -a | grep freeipa``rpmquery -a | grep ^pki-` `rpmquery -a | grep tomcat6`  `rpmquery -a | grep httpd` 389-ds-base bind

文件或目录	所在地方
日志文件	/var/log/dirsrv/slap-{instance}
配置文件	/var/dirsrv/slap-{instance}
数据库文件	/var/lib/dirsrv/slapd-{instance}

名称	含义
Max lifetime(days)	用户密码的最长时间，默认为90天
Min lifetime(hours)	用户修改用户密码后，必须要等一段时间才能再次被修改。这段时间表就是最短的修改时间表，默认为1小时。单位也是小时。它是为避免用户在修改密码后，立即改成原来的密码。否则就会弹出信息：Constraint violation: Too soon to change password
History size(number of password)	记录前几次的历史密码
最小长度	密码的最小长度。默认为8，即密码长度不小于8位。如果不需要校验密码长度，可以将它设置为0
Max failures	最大失败次数。即用户在登录或kinit的时候允许的最大输错密码的次数

[root@hdp136 ~]# kinit lch
kinit: Clients credentials have been revokedwhile getting initial credentials

[root@hdp134 ~]# kadmin.local    <-----执行kadmin.local
Authenticating as principaladmin/admin@EXAMPLE.COM with password.
kadmin.local: getprinc  lch  <---查看用户信息情况
Principal: lch@EXAMPLE.COM
Expiration date: [never]
Last password change: Tue Feb 27 11:11:02 CST2018
Password expiration date: Mon May 28 11:11:02CST 2018
Maximum ticket life: 1 day 00:00:00
Maximum renewable life: 7 days 00:00:00
Last modified: Tue Feb 27 11:11:02 CST 2018(lch@EXAMPLE.COM)
Last successful authentication: Tue Feb 2711:12:23 CST 2018
Last failed authentication: Tue Feb 27 14:11:07CST 2018
Failed password attempts: 6      <--------------打印信息

Number of keys: 4
Key: vno 3, aes256-cts-hmac-sha1-96, Special
Key: vno 3, aes128-cts-hmac-sha1-96, Special
Key: vno 3, des3-cbc-sha1, Special
Key: vno 3, arcfour-hmac, Special
MKey: vno 1
Attributes: REQUIRES_PRE_AUTH
Policy: [none]
kadmin.local:  modprinc -unlock lch@EXAMPLE.COM   <---输入的命令进行解锁
Principal "lch@EXAMPLE.COM" modified.

sasl_io_recv failed to decode packet forconnection....

[root@ipa110 /]# cat package.ldif
dn: cn=config
changetype: modify
replace: nsslapd-sasl-max-buffer-size
nsslapd-sasl-max-buffer-size: 2097152

[root@hdp136 ~]# cat /etc/nsswitch.conf
passwd:    files sss
...

[root@hdp136 ~]# service sssd status
sssd (pid 1799) is running...

[root@hdfs142 sssd]# vi /etc/sssd/sssd.conf
[domain/example.com]
cache_credentials = True
debug_level = 9    ---修改这个值然后重启sssd

LDAP Error: Connect error: TLS error -8054:Youare attempting to import a cert with the same issuer/serial as an existingcert, but that is not the same cert.

[root@test-1 OneNodeCDHCluster]#ipa-server-install
The log file for this installation can be found in/var/log/ipaserver-install.log
==============================================================================
This program will set up the IPA Server.
This includes:
  *Configure a stand-alone CA (dogtag) for certificate management
  *Configure the Network Time Daemon (ntpd)
  * Createand configure an instance of Directory Server
  * Createand configure a Kerberos Key Distribution Center (KDC)
  *Configure Apache (httpd)
  *Configure the KDC to enable PKINIT
To accept the default shown in brackets, press theEnter key.
WARNING: conflicting time&date synchronizationservice 'chronyd' will be disabled
in favor of ntpd
Apache is already configured with a listener onport 443:
*:443                  test-1.vpc.cloudera.com (/etc/httpd/conf.d/ssl.conf:56)
ipapython.admintool: ERROR    Aborting installation
ipapython.admintool: ERROR    The ipa-server-install command failed. See/var/log/ipaserver-install.log for more information
[root@test-1 OneNodeCDHCluster]#

vi  /etc/httpd/conf.d/ssl.conf
:1,$s/443/444/g

Checking IdM Server Logs：https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Identity_Management_Guide/server-config.html#logging

#!/bin/bash
for line in `grep"x:[5-9][0-9][0-9]:" /etc/passwd`
  USER=`echo $line | cut -d: -f1`
  FIRST=`echo $line | cut -d: -f5 | awk {'print $1'}`
  LAST=`echo $line | cut -d: -f5 | awk {'print $2'}`
   if [ !"$FIRST" ]
     FIRST=$USER
   if [ !"$LAST" ]
     LAST=$USER
   echo$USER | ipa user-add $USER --first=$FIRST --last=$LAST --password

Centos7中安装和配置FreeIPA

Centos7中安装和配置FreeIPA

1.4 FreeIPA Cookie处理安全漏洞编辑

2.1. 配置静态IP地址

2.2. 设置hostname

2.3. 升级软件和系统内核

2.4. 设置防火墙

2.5. 配置hosts文件

2.6. 配置随机数生成器

2.7. 安装域名解析器

3.1. 节点名称必须满足FQDN的要求

3.2. DNS说明

4.1. 安装ipa-server软件包

4.2. 配置ipa-server

4.3. 验证FreeIPA服务功能

4.4. 配置IPA用户

4.5. 查看IPA任务状态

5.1. 安装软件包

5.2. 执行客户端安装

5.2.1. 非交互式安装

5.2.2. 交互式安装

6.1. 创建备份证书

6.2. 主服务器添加节点

6.3. 热备服务器安装client

6.4. 热备服务器安装replica

6.5. 客户端配置修改

8.1. Directory Server

8.1.1. 文件说明

8.1.2. 多Master说明

8.1.3. 配置修改

8.1.3.1. 密码规则修改

8.1.3.2. LDIF修改

8.2. SSSD

8.2.1. 操作系统用户

8.2.2. SSSD日志配置

9.1. ipa-client-install时报错

9.1.1. Connecterror

9.1.2. Apache is already configuredwith a listener on port 443错误

9.2. 日志位置

9.3. 将系统用户导入FreeIPA中